SL6 Injectors

SL-6 INJECTOR

KEEP MACHINES RUNNING WITH THE RIGHT LUBRICATION SOLUTIONS

With higher demands on productivity, less time for maintenance and no tolerance for unplanned stops, lubrication performance is key to machine performance. Reliable lubrication solutions are a must to get the uptime you invested in.



The new SKF Lincoln SL-6 metering device is the latest generation of our single-line automatic lubrication system injector. A proven design that is thoroughly updated to meet new demands on maintainability, leakage protection and long-lasting performance even with harsh extreme pressure greases.

Your automatic lubrication system helps you increase productivity

With an SKF Lincoln automatic lubrication system you have taken a giant step towards increased productivity. Your lubrication system makes sure lubricant constantly flows to bearings, pins and bushings. It lubricates your machines while in motion, overcoming loads and allowing grease to protect all wear surfaces. With less maintenance, less time spent on manual greasing, reduced grease consumption and longer component life, you will experience improved return on your investment and increased reliability.

The new SL-6 injector offers robust performance

For some applications, harsh greases are necessary. The design changes and seal improvements implemented with the new SKF Lincoln SL-6 provide long-time performance even with harsh EP (extreme pressure) greases.

SL6 Injectors
SL6 Injectors
  • REDUCED RISK OF LEAKAGE

    Leaking injectors can cause under-lubrication of the bearing or the area around the injector can get soiled with grease. The improved sealing technology of the SL-6 reduces the risk of bypass, and in the unlikely event of a failure, the closed design leads bypass lubricant to the bearing.


  • REDUCED PLUMBING COSTS OF NEW LUBRICATION SYSTEMS

    SKF Lincoln single-line injectors use the residual pressure in the lubrication pipes to support venting of the injectors. This means that the venting time of the system can be kept to a minimum and even shorter than for a two-line system or a system with larger diameter pipes.

  • QUICKER REPAIRS - LESS DOWNTIME

    Bypassing injectors threaten the condition of the bearing and need to be exchanged or repaired as quickly as possible. On SL-6, you only need to exchange two components to get a bypassing injector to function properly.


  • RETROFITTABLE TO EXISTING LUBRICATION SYSTEMS

    The broad output range makes the SL-6 a suitable replacement for injectors with different outputs and the standard dimensions and connections make it easy to fit in an existing system. The improved lubricant output of 0.25cc to 5.00cc, reduces the amount of required injector inventory.