JSG Industrial Systems

JSG Lubrication Management Controller

Features and Benefits:

The JSG Lubrication Management Controller is a universal lubrication management system capable of handling most applications from simple run/pause systems to more advanced progressive, single and dual line systems. Innovative algorithms also give new flexibility and greater control over traditional single and dual line systems.

The practical intuitive design gives clear status indication. Advanced diagnostics help pinpoint system faults quickly and accurately. Although highly flexible, it remains simple to set up and operate via JSG's proprietary Lube-Logic.

The programming and data features of the JSG Lubrication Management Controller include:

The possibility of programming manually or via computer

Software available for computer programming and downloading operating history. Downloading can be carried out via direct link, data shuttle or modem/GSM

The Lubrication Management Controller itself features:

Special programming access to reduce tampering problems

Monitors one or two pressure or proximity switches

Incorporates a fault mode with diagnostic indications

Alarm incorporates an LCD readout, integrated audible alarm output with the ability to set the alarm to pulse or continuous mode

Instant system status tests

Short-circuit/open circuit detection

Pause and run time adjustable between five seconds and 24 hours

Multiple cycles per lubrication event and cycle counting

Manual override button

External fault lamp output (flash or steady option

Standard, IP54 rating for internal mounting or upgraded to IP67 with special enclosure for external use

Three digit LED readout

Test mode

Low level reservoir monitoring

Compact housing with mounting bracket

Simple Lube-Logic setup procedure

12/24 V operation

Compact size 70mm x 145mm x 38mm deep including mounting plate

Light weight: 300 grams

Part Numbers	Description
13-002002	JSG Lubrication Management Controller and Cable
13-002002-1	JSG Lubrication Management Controller
13-002002-2	5 metre cable harness
13-002005	Software for upgrading Controller from manual to electronic input and data retrieving
13-2009	Enclosure and cabling for upgrading to IP67

Voltage: 10-30V DC

Current Drain: 100ma max 70ma nominal (no load)

Pump Output: 7 A rms max (overload protected)

Lamp Output: 3 A max (overload protected)

Inputs: NPN 4.7V max residual voltage 2.2KO internal load

Fuse: 8 A fast blow 20mm glass

Connection: 14 way MOLEX MINIFIT JR

Communications: RS232 type

Dimensions: 70mm x 145mm x 38mm

Weight: 250g

Protection: IP54

Temperature Range: -15oC to 50oC

Means of Transferring Information from the JSG Lubrication Management Controller

1. via JSG data shuttle

Data shuttle available for remote downloading of data without need for laptop

The data shuttle can retrieve information from up to 10 different Controllers. This information can then be downloaded from the data shuttle to your desktop

Part number: 13-004000 (JSG Management Controller Data Shuttle)

2. via JSG GSM Vehicle Modem Kit (GSM-GSM or GSM-landline Modem)

Connecting JSG Vehicle Modem Kit to JSG Lubrication Management Controller allowing remote monitoring via GSM

The ultimate tool for downloading data from the Lubrication Management Controller without having to send a technician to site

The GSM modem needs to be installed together with the JSG Lubrication Management Controller

The main centre for receiving and up-loading of data needs to have modem connected to a PC in order to send and receive data

Each modem has its own identity and unique address

Part Numbers	Description
13-003600	JSG GSM Vehicle Modem Kit
13-003600-1	JSG Vehicle Modem
13-003600-2	Cables to suit Vehicle Modem
13-003600-3	Antennas for JSG Vehicle Modem
13-003600-4	Software and drivers for JSG Vehicle modem
13-003615	USB Modem to link with vehicle modem

Quicklinks
Home Page
JSG Autolube PDF
Autofill Grease Shutoff
G2 Timer